Quote: Features:
Two-channel USB digital oscilloscope (1MΩ, ±25V, differential, 14-bit, 100Msample/sec, 30MHz+ bandwidth - with the Analog Discovery BNC Adapter Board) Two-channel arbitrary function generator (±5V, 14-bit, 100Msample/sec, 20MHz+ bandwidth - with the Analog Discovery BNC Adapter Board) Stereo audio amplifier to drive external headphones or speakers with replicated AWG signals 16-channel digital logic analyzer (3.3V CMOS, 100Msample/sec) 16-channel pattern generator (3.3V CMOS, 100Msample/sec) 16-channel virtual digital I/O including buttons, switches, and LEDs – perfect for logic training applications Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS) Single channel voltmeter (AC, DC, ±25V) Network analyzer – Bode, Nyquist, Nichols transfer diagrams of a circuit. Range: 1Hz to 10MHz Spectrum Analyzer – power spectrum and spectral measurements (noise floor, SFDR, SNR, THD, etc.) Digital Bus Analyzers (SPI, I²C, UART, Parallel) Two programmable power supplies (0…+5V , 0…-5V). The maximum available output current and power depend on the Analog Discovery 2 powering choice: - 250mW max for each supply or 500mW total when powered through USB - 700mA max or 2.1W max for each supply when using an external wall power supply
|