Головная страничка Fusix содержит линки на образы жёстких дисков размером до 32 МБ (надо посмотреть чего они там натолкали в 32 МБ):
Quote:
6809 Root Filesystem (32MB for Dragon NX-32 and similar) Root file system for 6809 machines with userspace loading at 0x8000 (Dragon-nx32 and similar). Not suitable for COCO3. 68000 Root Filesystem (32MB) Initial root file system for 68000/68008/68010 systems. 8080/8085 Root Filesystem (32MB) Use this file system for 8080/8085 systems Z80 Root Filesystem (32MB) Use this file system for most Z80 systems Z80 Root Filesystem (16MB) Use this file system for small disks Z80 Root Filesystem (4MB) Use this file system for the 4MB hard drive emulated by Z80Pack (drivei.dsk). Z80 Root Filesystem (720K) A small root file system for putting on a DSDD 80 track disk Z80 Root Filesystem (32MB) for 0.4pre and later This file system has the binaries rebuilt in the new binary format and matches git tag e4b08326353948371596789975e9cb3e606e53c.
Плюс есть загрузочные образы для некоторых конкретных машин:
Quote:
IDE images are emulator images except where stated. Strip the first 1K off them when writing to real media. Please check the README file in git for each platform for more information.
Amstrad NC200 Boot floppy image for the NC200. Use with the root floppy image above. You can also put a file system on the PCMCIA card. Easy Z80 Bootable disk image for the EasyZ80. Memotech MTX512 Bootable disk/sd card image for MTX512 with CF or SD (raw image). Pentagon 1024K and some relatives Bootable disk image for the Pentagon 1024K and some similar systems with NemoIDE. Use a standard disk image such as the RC2014 CF image for the IDE disk. RC2014 with ROMWBW and Z80 Bootable disk image for RC2014 with ROMWBW. RC2014 with 8085 CPU Bootable disk image for RC2014 with 8085 CPU. Retrobrew/N8VEM SBC v2 Bootable disk image for the Retrobrew/N8VEM SBC v2. Can also be used for SD card boot with the ParPortProp interface. Sam Coupe Boot disk image for the Sam Coupe with AtomLite. Use something like the RC2014 CF image for the actual IDE interface image. Scorpion 256K and some relatives Bootable disk image for the Scorpion 256K and some similar systems with NemoIDE. Use a standard disk image such as the RC2014 CF image for the IDE disk. Small Computer Central SC108 with an ACIA Bootable disk image for the SC108 CPU card and the SC114 SBC with an ACIA based serial board. Small Computer Central SC108 with Z80 SIO Bootable disk image for the SC108 CPU card and the SC114 SBC with a Z80 SIO serial board. Small Computer Central SC126 Bootable disk image for the SC126 SBC. Suitable for SD or IDE boot via ROMWBW. Tandy TRS80 Model 4 Series Boot floppy and Hard disk image for a TRS80 Model 4/4D/4P system with 128K. JV3 format floppy and raw hard disk image suitable for use with the xtrs in the EtchedPixels github. Timex TC2068/TS2068 Disk image and cartridge image for Timex Sinclair TC2068/TS2068 with Twister and DivIDE (HDF and DCK format also suitable for the fuse emulator). Tiny68K / T68KRC Bootable disk image for Tiny68K and T68KRC systems. Tom's SBC (EPROM based) 64K EPROM image for Tom's SBC with Fuzix in ROM. Tom's SBC Bootable disk image for Tom's SBC with SCM Monitor, also usable as a root file system for the EPROM based version. ZX Spectrum +3 Boot floppy for ZX Spectrum +3 with DivIDE or ZXMMC. Use one of the standard disk images (eg RC2014) for the SD card image. With DivIDE set up using PC partitioning and a 32MB partition holding the root fs marked type 0x7E and a 4MB swap marked type 0x7F. It can co-exist with other non Fuzix partitions happily.
Users browsing this forum: No registered users and 81 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum