Proteus 8 Libraries Download

[kang3055]

Russian Lotto 7/49 winning numbers (Good luck !!!!)

[kang3055]

Я хорошо знаю схемы Proteus VSM 1998-2024 годов. Proteus VSM Ver 1.0(1998) ^^ korea

[kang3055]

GRBLHAL firmware bug resolved.

[kang3055]

GrblHal - 80W Laser Test ok

[kang3055]

Download Aztec-Reverse-Inlay-design-file

[kang3055]

It is the sum of the X-axis (1) and Y-axis (2). This means that the machine performs home settings on the X and Y axes.
This allows the machine to accurately find the reference positions of the X and Y axes and start work. If set up correctly, the machine will always
By starting from the same baseline, you can increase the precision of your work.

[VER:1.1f.20231005:]
[OPT:VNMHSL,35,1024,3,0]
Target buffer size found
[AXS:3:XYZ]
[NEWOPT:ENUMS,RT+,HOME,ES,SED]
[FIRMWARE:grblHAL]
[NVS STORAGE:*FLASH]
[FREE MEMORY:101K]
[DRIVER:STM32F411]
[DRIVER VERSION:230922]
[BOARD:CNC 3040]


$$
// Setting_PulseMicroseconds
$0=10.0
// Setting_StepperIdleLockTime
$1=25
// Setting_StepInvertMask
$2=0
// Setting_DirInvertMask
$3=0
// Setting_InvertStepperEnable
$4=7
// Setting_LimitPinsInvertMask
$5=1
// Setting_InvertProbePin
$6=0
// Setting_SpindlePWMOptions
$9=1
// Setting_StatusReportMask
$10=16
// Setting_JunctionDeviation
$11=0.010
// Setting_ArcTolerance
$12=0.002
// Setting_ReportInches
$13=0
// Setting_ControlInvertMask
$14=0
// Setting_CoolantInvertMask
$15=0
// Setting_SpindleInvertMask
$16=0
// Setting_ControlPullUpDisableMask
$17=0
// Setting_LimitPullUpDisableMask
$18=0
// Setting_ProbePullUpDisable
$19=0
// Setting_SoftLimitsEnable
$20=0
// Setting_HardLimitsEnable
$21=0
// Setting_HomingEnable
$22=1
// Setting_HomingDirMask
$23=3
// Setting_HomingFeedRate
$24=600.0
// Setting_HomingSeekRate
$25=3000.0
// Setting_HomingDebounceDelay
$26=100
// Setting_HomingPulloff
$27=3.000
// Setting_G73Retract
$28=0.100
// Setting_PulseDelayMicroseconds
$29=0.0
// Setting_RpmMax
$30=1000.000
// Setting_RpmMin
$31=0.000

// Setting_Mode
$32=1
Setting_PWMFreq
$33=1000.0
// Setting_PWMOffValue
$34=0.0
// Setting_PWMMinValue
$35=0.0
// Setting_PWMMaxValue
$36=100.0

// Setting_StepperDeenergizeMask
$37=0
// Setting_EnableLegacyRTCommands
$39=1

// Setting_JogSoftLimited
$40=0

// Setting_HomingLocateCycles
$43=1
// Setting_HomingCycle_1
$44=3
// Setting_HomingCycle_2
$45=0
// Setting_HomingCycle_3

$46=0
// Setting_SleepEnable
$62=0
// Setting_HoldActions
$63=3
// Setting_ForceInitAlarm
$64=0
// Setting_ProbingFeedOverride
$65=0

// Setting_AxisSettingsBase
$100=80.000
$101=80.000
$102=80.000

//
$110=9000.000
$111=9000.000
$112=500.000
$120=1000.000
$121=1000.000
$122=10.000
$130=540.000
$131=320.000
$132=50.000

// Setting_ToolChangeMode
$341=0
// Setting_ToolChangeProbingDistance
$342=30.0
// Setting_ToolChangeFeedRate
$343=25.0
// Setting_ToolChangeSeekRate
$344=200.0
// Setting_ToolChangePulloffRate
$345=200.0
// Setting_ToolChangeRestorePosition
$346=1
// Setting_DisableG92Persistence
$384=0
// Setting_PlannerBlocks
$398=35

// Setting_AutoReportInterval
$481=0
// Setting_UnlockAfterEStop
$484=1
// Setting_OffsetLock
$486=0
ok